Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Duct Repair for Clearwater Homeowners
If your energy bill jumped and some rooms never get comfortable, the problem may not be your air conditioner at all. Cracked, crushed or disconnected ductwork pushes conditioned air into attics, crawlspaces and wall cavities instead of into the rooms you paid to cool. In Clearwater, where humidity runs high through most of the year, a leaky duct system also pulls moisture into the house, and that shows up as clammy air and dusty registers. At Duct Cleaning Clearwater, we specialize in finding those failures and fixing them rather than handing you a quote for a whole new system. Our technicians have up to 13 years of experience and work with Rotobrush and Nikro platforms, so we can inspect the problem, repair it, and document it with before-and-after photos. We offer same-day repair in Clearwater. Call (844) 238-0931 and we’ll get a written estimate to you before any work starts.
HVAC Duct Installation
HVAC Duct Installation means building and connecting a complete duct system to a heating and cooling unit, and it’s the right call when there’s no ductwork to repair in the first place. A new build, a room addition, a converted garage, or a home that ran on window units and is now getting central air all create the same need. The layout has to match the equipment, the room load and the available space, which is why we measure before we cut anything. We design the runs, install ducting and sealing, and connect supply and return properly so static pressure stays within what the air handler can push. Typical HVAC duct installation in Clearwater runs $1,800-$6,500 for a standard home, and the written estimate sets the final price.
Layout and Sizing
A duct system that’s undersized for the equipment forces the blower to work against resistance, which cuts airflow and shortens the life of the motor. Supply and return sizing, trunk versus branch design, and register placement all get worked out on paper first. We measure the rooms and the available chases, then map the runs before touching a saw.
Sealing and Insulation
Every joint, takeoff and boot gets sealed, because gaps at connections waste more air than most homeowners expect. Insulation goes on the runs that pass through unconditioned space, where summer heat soaks straight through bare duct wall. We check the sealed assembly before the system is put back into service.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Air Duct Replacement
Air Duct Replacement is the removal and rebuilding of duct runs that are past the point where patching helps. Older homes around Clearwater often have ductboard or flex systems that have sagged, torn at the collars, or collected years of debris that cleaning can’t fully dislodge. If a run has collapsed, if the liner is compromised, or if repeated repairs keep failing in the same spot, replacement is the honest answer. We scope the job room by room, remove the failed sections, and install new ducting with sealed connections. We can also check the filtration hardware while we’re in the system, since Honeywell and Aprilaire components are what we work with most often on that side. Typical air duct replacement in Clearwater runs $900-$4,200 depending on how many runs are involved, and the estimate is free.
When Repair Stops Making Sense
A single cracked joint is a repair. A run that has lost its shape, torn its inner liner or separated at multiple points is a replacement. We tell you which category each run falls into so you can see where the money is actually going.
Material Choices
Flex, rigid metal and ductboard each make sense in different parts of a house, and we match the material to the space and the run length. The right choice limits sagging and keeps airflow steady over the life of the system. We explain the options before anything gets ordered.
Ductwork Repair
Ductwork Repair covers the smaller failures that add up: disconnected joints, torn flex, crushed sections behind drywall, and gaps at registers. These are the problems behind uneven cooling, whistling at the vent, and dust settling on furniture faster than it should. Because we offer repair alongside duct cleaning Clearwater, we can fix what we find during the same visit instead of asking you to book a second contractor. We use Rotobrush and Nikro gear for mechanical agitation and HEPA-level capture, and Abatement Technologies equipment gives us containment so loosened debris and particulates don’t drift through the house while we work. Typical ductwork repair in Clearwater runs $180-$750 per job, depending on access and how many connections need attention. The written estimate sets the final price, and there’s no per-vent charge.
Finding the Leaks
Some failures are obvious the moment a register comes off. Others hide at takeoffs and behind insulation, which is why we inspect the accessible runs and check airflow at the vents before we commit to a plan. What we find determines what we quote.
Sealing Methods
Mastic and approved tape at the joints, proper support straps under flex, and repairs that get the run back to its correct shape. We seal the connection, not just the visible gap. That’s what stops the same leak from reappearing.
Duct Replacement
Duct Replacement is a focused job: swapping out a defined section of failed ducting without rebuilding the whole system. It fits the case where most of the network is sound but one or two runs keep causing trouble. Crushed trunks under a raised floor, a run that’s damp and deteriorating, or a section that’s been patched twice and failed again all justify it. We isolate the section, replace it with correctly sized ducting, and reinstate support and sealing at both ends. Guardsman access components and register boots are among the parts we handle when the connection points need renewal as well. Typical duct replacement in Clearwater runs $400-$2,000 for a defined section, and a free estimate pins the number down before work begins.
Isolating the Bad Section
Replacing more duct than you need is a waste, and replacing too little leaves the problem half fixed. We trace the run, confirm where it actually fails, and limit the scope to that. You get a smaller, more accurate job.
Restoring Airflow
A replacement section has to match the original sizing and support or it will sag and underperform like the one it replaced. We strap flex at proper intervals and keep the bends as gentle as the space allows. Then we verify airflow at the nearest registers.
Ductwork Installation
Ductwork Installation is the work of adding new runs to an existing system, usually when one area of a home never got proper service. A Florida room with no supply, a converted lanai, a home office that bakes in July, or a bedroom that stays five degrees warmer than the rest of the house are the typical triggers. Adding a run isn’t just cutting a hole in a trunk. The added load has to be checked against what the air handler can deliver, or every other room loses airflow to feed the new one. We assess capacity, run the new ducting with sealed connections, and install the register. Typical ductwork installation in Clearwater runs $350-$1,200 per added run, with the written estimate setting the final price. Before adding runs, we often clean the existing system first.
Capacity Checks
Adding supply to a system that’s already maxed out makes the whole house worse, not better. We measure static pressure and airflow to see whether there’s headroom for another run. If there isn’t, we say so instead of installing one anyway.
Routing Through Finished Space
Running duct through a finished house is a puzzle of chases, soffits and attic space. We plan the route to keep runs short and bends shallow, since both affect how much air reaches the register. Where the path is tight, we walk you through the options first.
Brands We Service
We work with Honeywell and Aprilaire air-quality components, which means when a filter cabinet, humidifier bypass or media filter is part of the picture, we know how it integrates with the duct system and where those parts tend to wear. Cleaning and repairing ductwork without checking the hardware hanging off it leaves half the job undone.
Abatement Technologies equipment is part of how we contain dust and debris during a repair, and Guardsman components come into play at register boots and access points. We’re not a dealer for any of these brands, and we don’t claim to stock their parts, but we know how they go together. Whether you have Honeywell or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Rooms that won’t cool evenly. If the front bedroom is fine and the back of the house never catches up, the supply duct serving it may be crushed or disconnected. Air is going somewhere, just not into the room.
- Whistling or weak airflow at a register. A high-pitched sound at the vent usually means a restriction or a leak right behind it. Both get worse over time and both waste cooling dollars.
- Dust returning within days of cleaning. If surfaces are dusty again almost immediately, the dust is likely being pulled in through a duct gap. Cleaning without sealing the gap fixes nothing.
- Visible tears or sagging duct in the attic. Flex duct that has lost its shape or torn its outer jacket is leaking conditioned air into the attic. That’s money going straight out the roof.
- Higher energy bills with no other explanation. When the bill climbs and nothing about your habits changed, a duct leak belongs on the list of suspects. We can check it with a free estimate.
Our Process, Step by Step
- 1
Call and describe the problem. Tell us what you’re seeing: hot rooms, whistling vents, dust, or a bill that jumped. That helps us arrive with the right equipment. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
- 2
On-site inspection. We pull registers, inspect accessible runs, and check connections at the air handler and trunk. Rotobrush and Nikro inspection gear lets us see inside runs we can’t reach by eye.
- 3
Written estimate before any work. You get a flat price per job, with the scope spelled out and no per-vent charges. Nothing starts until you approve the number.
- 4
The repair itself. We contain the work area with Abatement Technologies equipment, then repair or replace the failed sections and seal every connection we touch. Before-and-after photos are part of the job, not an extra.
- 5
Verification and walkthrough. We check airflow at the registers and confirm the repair holds before we pack up. You see the photos, ask questions, and know exactly what was done.
How Much Does Air Duct Repair Cost in Clearwater?
Air duct repair in Clearwater typically runs $180-$750 for a straightforward job and $900-$4,200 when a full replacement is the right call. A single disconnected joint or torn flex run sits at the low end. A collapsed trunk, multiple failing runs or a system that needs new ducting throughout pushes toward the upper range. HVAC duct installation for a home without ductwork runs $1,800-$6,500, and adding a single run to an existing system runs $350-$1,200.
What moves the number: how many runs are involved, whether the duct is accessible in the attic or buried in a soffit, the material being installed, and whether the filtration hardware needs attention at the same time. Access is the big one. A run you can walk to costs less to fix than one behind finished drywall.
How to avoid overpaying: ask for a flat price per job instead of a per-vent or per-hour figure, get the scope in writing, and ask for before-and-after photos of your own ductwork. Be careful with a very low advertised price, because it often grows once the technician is on site. Our estimate is free, the price is agreed before work starts, and the written estimate sets the final amount.
Our Service Area Near Clearwater
We cover Clearwater and the surrounding Pinellas and Pasco communities, including Clearwater, Dunedin, Safety Harbor, Largo, Palm Harbor, Oldsmar, Bardmoor, South Highpoint, Belleair and Port Richey. Dispatch runs Sunday through Friday, 7am to 7pm, and most addresses in that ring get a same-day visit when you call in the morning. Call (844) 238-0931 to check the schedule for your street.
Serving Clearwater, FL – Our Local Coverage Area
We serve Clearwater and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Air Duct Repair in Clearwater
Air duct repair is the correction of physical damage to the duct system: disconnected joints, torn flex, crushed runs, failed seals and gaps at registers. It’s different from cleaning, which removes debris but doesn’t fix the structure. We often do both in one visit because a sealed, intact system is what makes cleaning worthwhile. Call (844) 238-0931 for a free estimate.
Most single-run repairs take one to three hours, and a multi-run replacement or a full duct installation usually takes a day or more. The estimate you receive includes a time frame so you can plan around it. Access and how many runs are involved are the two factors that move it most. Call (844) 238-0931 and we’ll give you a realistic window.
Typical air duct repair in Clearwater runs $180-$750 per job, with full replacement at $900-$4,200 and HVAC duct installation at $1,800-$6,500. The written estimate sets the final price, and we agree on one flat price per job before any work starts. There are no per-vent charges. Call (844) 238-0931 for an exact quote, and estimates are free.
Yes, we work with Honeywell and Aprilaire air-quality components as part of duct repairs and cleaning. That includes filter cabinets and media filters that connect to the duct system. We’re not a dealer and don’t claim to stock their parts, but we can assess the hardware and tell you what it needs. Call (844) 238-0931 to book an inspection.
Yes, same-day repair is often available in Clearwater when you call in the morning. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed on Saturday; a call outside dispatch hours is booked into the next opening. Call (844) 238-0931 to check today’s schedule.
We stand behind our work with a satisfaction guarantee, and the written estimate spells out exactly what’s covered on your job. Because we don’t promise warranty terms we haven’t confirmed in writing, the estimate is the document to check. Ask us to walk through it before work starts. Call (844) 238-0931 with any questions.
Clear access to the attic hatch and the air handler, and move anything fragile away from the registers we’ll be opening. If you have pets, secure them in a room away from the work area. Beyond that, there’s nothing to do; we handle containment and cleanup. Call (844) 238-0931 if you’re unsure what access we’ll need.
Schedule Your Air Duct Repair Service in Clearwater Today
Leaky or damaged ductwork costs you every month it goes unfixed, and the repair is usually simpler than homeowners expect. Call (844) 238-0931 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get one flat price per job, before-and-after photos of your own ductwork, and a system that actually delivers the air you’re paying for.
Written by the team at Duct Cleaning Clearwater.